1 c o 0.1 f to-92 encapsulate three-terminal voltage regulator s CJ79L15 three-terminal negative voltage regulator features maximum o utput c urrent i om: 100ma output voltage v o : -15v continuous total dissipation p d : 0. 625 w absolute maximum ratings (operating temperat ure range applies unless otherwise specified) paramete r symbol value units input voltage v i -35 v operating junction temperature range t opr 0~+125 storage temperature range t stg -55~+150 electrical characteristics at specified virtual jinction temperature (vi=-23v, io=40ma,ci=0.33 f, c o = 0 . 1 f, unless otherwise specified ) parameter symbol test conditions m in t yp m ax u nit 25 -14.4 -15 -15.6 v -17.5v v i -30v, io=1ma~40ma -14.25 -15 -15.75 v output voltage vo io=1ma~70ma 0-125 -14.25 -15 -15.75 v io=1ma~100ma, v i =-23v 25 25 150 mv load regulation vo io=1ma~40ma, v i =-23v 25 15 75 mv -17.5v vi -30v,io=40ma 25 65 300 mv line regulation vo -20v vi -30v,io=40ma 25 50 250 mv quiescent current iq 25 6.5 ma iq -20v vi -30v, io=40ma 0-125 1.5 ma quiescent current change iq 1ma i o 40ma 0-125 0.1 ma output noise voltage v n 10hz f 100khz 25 90 v ripple rejection rr -18.5v vi -28.5v,f=120hz 0-125 34 39 db dropout voltage vd 25 1.7 v typical application v i 2 3 vo utc ci 0.33 f note: bypass capacitors are recommended for optimum stabili ty and transient response and should be located as close as possible to the regulators. CJ79L15 to-92 1. gnd 2. in 3. out 1 of 1 sales@zpsemi.com www.zpsemi.com CJ79L15 a,jun,2013
|
